Product ID:FEL-POXY STEEL, 51180 COMPONENT A, FP-175A
MSDS Date:11/08/1990
FSC:8040
NIIN:00N040539
Kit Part:Y
MSDS Number: BSGRL

FEL-PRO INC

7450 N MCCORMICK BLVD
SKOKIE, IL 60076
US

Emergency Phone: 708-674-7700;312-761-4500

Info Phone: 708-674-7700;312-761-4500

Preparer: PAT FRASER

Cage: FO660

FEL-PRO INC DIV OF FELT PRODUCTS MFG CO

1103 SKOKIE, IL 60076-4046 US

Telephone: 847-674-7700 OR 312-761-4500

Cage: 73165

EPOXY RESIN; (BISPHENOL-A EPOXY)

CAS: 25068-38-6

RTECS: KC2100000

Fraction By Weight: <20-30%

NOVALAC EPOXY RESIN; (NOVOLAC EPOXY RESINS)

CAS: 28906-96-9

Fraction By Weight: <20-30%

PROPANE, 2,2-BIS(P-(2,3-EPOXYPROPOXY) PHENYL)-; (BISPHENOL

CAS: 1675-54-3

RTECS: TX3800000

Fraction By Weight: <20-30%

NON HAZARDOUS INGREDIENTS

Fraction By Weight: BALANCE

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:POSSIBLE REDNESS OR MILD TRANSIENT
IRRITATION OF SKIN UPON PROLONGED, REPEATED CONTACT.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:REDNESS OR MILD TRANSIENT IRRITATION IN
SENSITIVE INDIVIDUALS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYE:FLUSH WITH TEPID WATER FOR AT LEAST 15 MINUTES, HOLDING
EYELIDS APART-GET MD. SKIN:WASH WITH SOAP & WATER. INHAL:MOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . INGEST:CALL MD
IM MEDIATELY .

Flash Point Method:PMCC
Flash Point:>200F,>93C
Extinguishing Media:USE WATER FOG, DRY CHEMICAL, FOAM, CO*2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT (FP N0.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:WHEN POSSIBLE MIX COMPONENTS A & B & ALLOW TO
CURE TO AN INERT, HARMLESS SOLID; OTHERWISE ABSORB SPILL WITH INERT
ABOSRBENT MATERIAL; SWEEP OR SCOOP UP. WASH AREA WITH DETERGENT AND
WATER. PREVENT WAS HINGS FROM ENTERING WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR IF
VENTILATION IS INADEQUATE.
Ventilation:LOCAL AND MECHANICAL EXHAUST ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APRV CHEM WORK GOGG .
Other Protective Equipment:COVERALLS OR APRON TO MINIMIZE CONTACT.
Work Hygienic Practices:AVOID SKIN AND EYE CONTACT. USE STANDARD GOOD
HOUSEKEEPING PRACTICES.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:500F,260C
Vapor Density:>1
Spec Gravity:2.82 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK GREY PASTE, CHARACTERISTIC EPOXY RESIN ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, BASES, AMINES & MERCAPTANS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:PYROLYSIS YIELDS CO, CO*2, AND
INCOMPLETELY BURNED HYDROCARBONS.
Conditions to Avoid Polymerization:PREMATURE REACTION W/ACIDS, AMINES,
MERCAPTANS.

Waste Disposal Methods:BURY CURED PRODUCT IN POSTED LANDFILL. FOR
UNCURED PRODUCT, USE CONTROLLED INCINERATION OR BURY IN A POSTED
LANDFILL IN ACCORDANCE TO LOCAL, STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.